Mod Podge ® Acrylic Sealer - Pearlized, 11 oz.

Item # 1449

Decoupage with a Fine Glitter Finish! Add an eye-catching glisten to projects with new hologram Glitter Mod Podge. Give projects a luminous finish with Mod Podge Pearlized sealer.

Size: 11 oz.

Clear All Filters

Type:

Keyword:

<< Previous Items

(53 items)

Next Items >>

Plaid TV Kit - Mod Podge/Tools

M/P Acrylic Sealer Gloss 12 oz

M/P Acrylic Sealer Matte 12 oz

M/P Acrylic Sealer Pearlized 11 oz

+ Show More Items at a Time - Show Fewer Items at a Time

How do I prevent my paper from warping and bubbling after I apply Mod Podge?

Some papers such as gift wrap and magazine cutouts will warp and bubble after applying Mod Podge. To minimize the warping, spray the front and back of these papers with an acrylic sealer such as Mod Podge Acrylic Sealer, and let dry. Be sure to test the sealer first on the paper you want to use before continuing with the project. Apply Mod Podge to the back of the paper or to the project surface and press the paper firmly to the surface, let dry completely. (Do NOT apply a top coat until the paper has dried completely to the surface.) Let it set for about 5 minutes, then recheck your project to see if there are any more bubbles. If there are, press it down again. If the paper still doesn't lay down, take a straight pin to release air under the paper and press smooth. more...

Q:	How do I prepare my fabric for using Fabric Mod Podge® on it?
A:	You must pre-wash, dry and iron the fabric. DO NOT use fabric softener. If using a t-shirt or a thin fabric, place a piece of wax paper inside directly under where you will be decoupaging your design.

Q:	My Mod Podge surface is still sticky after it dries. What do I do?
A:	Hard Coat Mod Podge dries clear with a non-tacky surface. If using Gloss, Matte or Satin Mod Podge apply a clear acrylic sealer to the surface after it has cured 4 weeks.