 |
|
 |


Click image for larger view

|
 |

Glitter Hot Lips T-shirt
|
|


 |
Squeegee applicator (included in Silk Screen Stencil package) |
 |
Cotton t-shirt |
 |
Paper towels |
 |
Parchment paper |
 |
Iron |
 |
Water |

1. Remove backer from silk screen stencil and position on shirt. Squeeze a thick line of adhesive across top of design. Holding squeegee applicator at a 45 degree angle using even pressure, pull a thin coat of adhesive evenly across screen stencil design in a single downward motion. Continue until design is completely covered in a thin coat of adhesive. Make sure to leave enough room on either side so that adhesive does not spill over to garment or tape off edges with masking tape. Let stand for 30 seconds. Repeat, creating a thick even coat. 2. Pull up screen and reposition stencil, making sure to avoid the area where you have already applied adhesive. Repeat adhesive application from step #1. Wash out screen stencil immediately. 3. Apply pink glitter (from Fun Fashion pack) on top of wet adhesive on first lip design. Apply red color glitter (from Jewel Tones pack) on top of second lip design. Allow glittered adhesive to dry completely (up to 3 hours) 4. Place parchment paper on top of glittered design; iron each section for 30 seconds (cotton setting). Shake off excess glitter and reveal your design.
|

|
Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, Plaid Enterprises, Inc. disclaims any liability for untoward results.
Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product.
Copyright: All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper.
|
|