search for arts and crafts



Project Detail

Project Detail



Bucilla Needle Crafts > Projects


Click image for larger view



Foil Chandelier Pillow


   


98526 - Simply Screen™ Paints - Metallic - Cosmopolitan
98529 - Simply Screen™ Paints - Metallic - Pond Scum
98537 - Simply Screen™ Silk Screen Glitter™ Packs - Precious Metals
98541 - Simply Screen™ Accessories - Silk Screen Foil™ Variety Pack
98544 - Simply Screen™ Silk Screen Stencils™ - Chandelier


Squeegee applicator (included in Silk Screen Stencil package)
Cotton pillow case
Paper towels
Parchment paper
Iron
Water



1. Remove backer from silk screen stencil and position to the left on pillow case. Squeeze a thick line of Pond Scum Metallic paint across top of design. Make sure to leave enough room on either side so that paint does not spill over to pillow case or tape off edges with masking tape.
2. Holding squeegee applicator at a 45 degree angle using even pressure, pull a thin coat of paint evenly across stencil design in a single downward motion. Continue until design is completely covered in a thin coat of paint.
3. Wash out screen stencil and blot dry.
4. Repeat steps 1-3 to place and adhere second chandelier on the right side of pillow case.
Apply Cosmopolitan Metallic paint in the same manner as before. Allow painted chandelier designs to dry completely (about 2 hours) before proceeding.
5. Repeat steps 1-3 to place and adhere third chandelier.
6. Apply a thick line of adhesive across top of design. Make sure to leave enough room on either side so that adhesive does not spill over to garment or tape off edges with masking tape. Holding squeegee applicator at a 45 degree angle using even pressure, pull a thin coat of adhesive evenly across screen stencil design in a single downward motion. Continue until design is completely covered in a thin coat of adhesive. Let stand for 30 seconds. Repeat creating a thick even coat.
7. Allow adhesive to dry completely (up to 3 hours)
8. Lay gold foil sheet, shiny side up, over dried adhesive and parchment paper on top of foil; iron each section for 30 seconds (cotton setting).
9. Allow heated foil to cool completely. When cold, quickly pull off foil to reveal your design!

 
Email to a Friend Free Newsletter

Disclaimer: The information found in each project is presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, Plaid Enterprises, Inc. disclaims any liability for untoward results.
Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product.
Copyright: All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper.

 

Home    Craft Categories    Brands    Articles    Store Locator    International Locator    About Us    Contact Plaid
Help    Newsletter    Idea Submission    Independent Retailers    Job Opportunities   Craft Links    Link To Us    Privacy Policy    Copyright

Customer Service: E-mail or call our Consumer Advisory Team
at 1-800-842-4197 Mon - Fri. 8am - 5pm EST

©2000 - 2009 Plaid Enterprises, Inc. All rights reserved.