Email Signup

Subscribe to the Plaid Crafts Newsletter for craft project ideas, product news, our live events, and more!

Upcycle Your Glassware! Save 25%

Save 25% on orders $60+ and get free U.S. ground shipping! Explore the NEW! FolkArt Murano Glass Paint! This promotion cannot be combined with other promos. See shipping details.

Use Code

Sale Ends 3/23/24

Gallery Glass Window Color Acrylic Glass Paint

Gallery Glass FAQ

Apply two or three colors of Gallery Glass paint on a stencil blank. Next, swirl the color by slightly mixing using a palette knife.  Allow to dry.  Once dry, the marbled paint can be cut into shapes using a craft knife and then placed on a glass vase or other 3D surface. The paint will cling to the surface until peeled and removed. This technique is perfect for a modern, colorful seasonal display!
  1. Select your pattern.
  2. Prepare your work surface: work on a flat surface protected with newspaper.
  3. Compare the size of your desired application surface to that of your planned design.
  4. Cut out or copy the pattern from your pattern sheet. For ease, cut to separate patterns from a large pattern sheet.
  5. Tape desired pattern to backside of your project surface.
  6. Simply outline & fill with Gallery Glass.
  • Glass cleaner or rubbing alcohol
  • Masking tape
  • Ruler
  • Scissors
  • Paper Towels
  • Notebook paper
  • A glass surface, such as from a picture frame
  • Toothpicks
  • Gallery Glass Tool Set (optional)
Surfaces decorated with Gallery Glass are best decorated when the air temperature is above 45°F and does not exceed 90°F. Extreme temperatures during the application and curing process may cause cracking or distort the intended artwork. Gallery Glass colors may also fade overtime when continually exposed to direct sunlight.
Because a home’s storm door is not temperature controlled all the time, it is not a viable surface for Gallery Glass. The same rule can be said for mobile or travel homes and automobiles.
 
Gallery Glass is recommended for indoor use only as it is not formulated to be used outdoors, in high humidity areas, or areas that are not temperature controlled within normal ranges. Areas that will come in contact with water or heavy condensation such as bathrooms are not suitable for Gallery Glass products.
 
Gallery Glass Stained Glass Effect Paint and Liquid Leading are non-toxic, water-based products perfect for creating children’s art projects such as sun catchers or photo frames with adult supervision. The AP Seal on all Gallery Glass paint products indicates they are non-toxic and safe.
 
Gallery Glass bottle tips should be removed from the bottle and rinsed thoroughly with water while the paint is still wet. If paint dries in the bottle tip, use a liner brush and water to clean out the dried paint. To prevent paint from drying inside the bottle tip, insert a straight pin directly into the tip immediately after use. Remove the pin only when you’re ready to begin your next project.
 
Gallery Glass Instant Lead strips are convenient adhesive leading lines that are fool-proof, easy-to-use and work every time! Instant Lead can be used for vertical application. Simply peel the adhesive strips from the backing sheet and position on the surface where desired. Touch up gaps, if needed, with a small amount of Liquid Leading. This step can be done directly on the vertical project surface.
 
Leading lines can be drawn free hand or if desired, by following a printed pattern placed under a glass surface, and following the pattern lines. Apply Liquid Leading from the center of the design working outwards, until all pattern lines have been leaded. Keep the nozzle tip ¼” to 1” above the project surface and apply even pressure to create a uniform line of Liquid Leading. Allow the leading line to drape onto the pattern line. Continue until all elements of the design have been outlined. NOTE: Liquid Leading cannot be applied directly to a vertical surface. For vertical application, use Instant Lead or dried lines of Liquid Leading that have been applied to a horizontal surface.
 
Gallery Glass Liquid Leading simulates the look of real leading lines in stained glass. It is a non-toxic, water-based paint. It does not contain any lead. The nozzle tip of Gallery Glass Liquid Leading creates a clean, easy-to-apply strip of liquid lead.
 
If Gallery Glass Stained Glass Effect Paint or Liquid Leading accidentally spills on clothing, it may be removed while the paint is still wet with soap and water. Gallery Glass products misplaced on woodwork can be removed with a damp rag. Be careful NOT to allow spilled Gallery Glass paint or leading to dry on fabric or wood surfaces. 
 
On most surfaces, an entire Gallery Glass project can be removed or simply a section of color from a leaded design, if desired. Simply score along the leading line edge using a craft or utility knife, and then lift a corner to peel away the undesired color. Clean the surface well, allow to dry, and then you are ready to reapply the new Gallery Glass color of choice. NOTE: If applied to polystyrene or Plexiglass, Gallery Glass dries to a permanent finish and cannot be removed.
 
It is best not to allow Gallery Glass projects to come in contact with other surfaces or other Gallery Glass projects as they will stick together. To protect Gallery Glass projects, place wax or parchment paper over your project.
 
A Gallery Glass project that needs to be cleaned should be lightly wiped with a water dampened cloth. Let project cure at least one week before cleaning. Never use harsh chemicals, sprays, or abrasives on a completed Gallery Glass project. Never submerge a window cling in water. 
 
Let Gallery Glass dry for 24 hours. Fully cured in 7 days. NOTE: The thickness of the Gallery Glass application as well as the humidity and temperature may vary the dry times.
 
Yes, Gallery Glass can be peeled away from most surfaces once dried. To remove the design, use a craft knife or the Gallery Glass scraper to peel up the border starting in one corner. Slowly peel the entire project from the surface, working toward the opposite corner from where you began. Most projects will peel off in one large piece. Store the project on wax paper to prevent sticking and simply reapply to the desired surface when ready. NOTE: If applied to polystyrene or Plexiglass, Gallery Glass dries to a permanent finish and cannot be removed.
 
Adding texture to Gallery Glass Paint is great for creating privacy windows. Apply Crystal Clear in a random “swirl” pattern to give it texture. Do not comb or tap after applied. You can also create texture with a sponge, a brush, or with the combing tool in the Gallery Glass Tool Set.
 
Two different colors of Gallery Glass paint can be blended to create a shaded or highlighted design. Simply apply the two colors close to each other and while still wet, move back and forth between the colors using a toothpick or the Gallery Glass combing tool.
 
To remove bubbles in paint, use the pointed end of the Gallery Glass combing tool, a toothpick or other pointed object to “comb” back and forth quickly in straight lines. Comb all the way to the leading lines, using the leading as a bumper. NOTE: paint applied on the leading will not show when the project is cured. If bubbles persist, comb again in the opposite direction. After combing, lift and hold the project surface firmly in one hand and then tap directly under the combed section with the combing tool. Keep in mind, some bubbles are to be expected given the nature of the paint.
 
Do not shake a bottle of Gallery Glass paint as this motion will possibly introduce more bubbles to the product. Shaking a bottle rapidly may also thin the paint, making it not acceptable for vertical applications. To remove air bubbles, simply tap the bottle bottom firmly on a tabletop which should remove some air pockets. If a bottle is severely shaken and contains several air bubbles, it is best to allow the bottle to sit upright overnight before using it. 
 
Gallery Glass paint can be applied both horizontally and vertically because of its “stay put” tendencies – the paint will not run or drip. Apply the paint to the perimeter of a leaded design section, then fill in. Add paint equal to the leading line level, applying the paint onto the leading, using it as a bumper. Fill in section completely to prevent light leaks.
 
Yes, surfaces should be thoroughly cleaned prior to beginning a Gallery Glass project.  Basic household glass cleaner or soap and water will do the trick. Make sure the surface is thoroughly dry before beginning.
 
Gallery Glass paint can easily be applied to a vertical surface such as a window or interior glass door. It can also be applied to horizontally to surfaces such as a picture frame or plastic suncatcher. Use on a variety of surfaces including mirrors, plastic surfaces, glass bottles, vases, jars, windows and so much more. Gallery Glass can also be applied to polystyrene or Plexiglass, however, note that on polystyrene or Plexiglass, Gallery Glass dries to a permanent finish and cannot be removed.
 
Gallery Glass is a non-toxic, water-based stained glass effect paint that dries to a vibrant transparent color to simulate the look of real stained glass. Gallery Glass colors and Liquid Leading can be left on display permanently, but can be simply away from most surfaces once dried. Gallery Glass can be applied to both horizontal and vertical surfaces making it perfect to use on windows that are already vertically installed.
 

Learn with Plaid

Inspiration and education at your fingertips.

Learn

Find the Answer

Common questions we get asked by your peers.

FAQs