Email Signup

Subscribe to the PLAID Crafts Newsletter,
and we’ll throw in $10 towards your next purchase.

FAQs

After I apply Mod Podge to my cup or plate, can I still use it?
Mod Podge covered items are basically for decorative use and Mod Podge should be used for dry items only. However, if you place a paper doily on your decoupaged surface before placing the food, you can serve from your project.
Can I burn candles I have decorated with florals, decoupage, etc.?
Decorated candles using Mod Podge ® or Royal Coat ® Decoupage Finish are meant for decorative purposes and not for illumination. Many of the decorations would catch fire and be hazardous if the candle were burned. However, if you are using a wide pillar candle and the decorations do not go to the top of the candle, it can be burned down slightly to create a well, then a votive candle inserted into the well. A new votive candle can be inserted when the old one is finished. Use extreme caution and good judgment when burning candles that have been decorated.
Can I burn my decoupaged candles?
Candles with decoupaged designs are decorative and should not be burned. Your designs can be destroyed if the candle is burned. In addition, while both Mod Podge and Royal Coat are not flammable, items used with these glues may be.
However, there is a trick if you want to "burn" your decorated candle. Burn the decorated candle until a small well is formed -- a well about the size of a votive candle. Place a small piece of aluminum foil in the bottom of the well. Then place the votive candle in the well and burn it. Replace the votive candle as needed.
Can I use magazine, gift wrap or book pages with Mod Podge?
Yes, however you need to check to make sure that the ink will not smear. Test a small piece before starting your Mod Podge project. You can also add additional protection, by spraying the front and back of these papers with an acrylic sealer such as Mod Podge Clear Acrylic Spray, and let dry. Be sure to test the sealer first on the paper you want to use before continuing with Mod Podge.
Can I use photographs with Mod Podge?
We do not recommend using original photographs. Have a color copy made with a dry toner copier before applying Mod Podge.
Can my Mod Podge-coated surface be washed?
No, just lightly wipe Mod Podge projects with a dampened, lint-free rag.
Do I need to seal my ink-jet printouts before applying Mod Podge?
Yes, you will need to seal your ink-jet print with a matte acrylic sealer such as Mod Podge Acrylic Sealer, before using Mod Podge. Spray a very light coat, let dry and spray again.
How can I achieve a high shine finish on my decoupage project?
If you would like to achieve a high shine finish, complete your decoupage project in the traditional way, applying two top coats of decoupage finish to the completed design. Wait one week for the finish to cure, then spray the project with Mod Podge Acrylic Spray Gloss Sealer.
How can I achieve the smooth satin look of traditional decoupage?
After applying at least 6 coats of Royal Coat Decoupage Finish to your project (allowing 20 minutes drying time between coats), follow these instructions:
  1. Wet #400 sandpaper with water and a drop of dish soap and sand the finish lightly until flat and smooth. Wipe dry.
  2. Polish the project with #0000 steel wool.
  3. For an even glossier finish, dip the steel wool into a liquid paste of linseed oil and pumice. Gently polish the surface until smooth.
How can I decoupage clear plates to be food safe?
This is called decoupaging in reverse. To decoupage in reverse, please refer to 33302 Botanical Birds. To create the look of these plates, simply apply the Martha Stewart Crafts Decoupage Finish of your choice to the backside of the glass plate after it is properly prepared.
Then apply the Martha Stewart Crafts Decoupage Finish of your choice to the front side of the bird paper cut-out and apply the image to the backside of the plate. Continue with the standard decoupage procedure applying the Martha Stewart Crafts Decoupage Finish of your choice and allowing proper drying times between applications. Complete the look of the reverse decoupage by painting an opaque application of paint over the entire backside of the plate. Allow to cure for 21 days prior to use.
Displaying results 1-10 (of 219)
 |<  < 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10  >  >| 
Questions? Ask an Expert