Email Signup

Subscribe to the PLAID Crafts Newsletter,
and we’ll throw in $10 towards your next purchase.

FAQs

What is the difference between Martha Stewart Crafts Vintage Decor paint and Martha Stewart Crafts Multi-Surface Craft paint?
Martha Stewart Crafts Multi-Surface Craft Paint is a durable, premium, multi-surface acrylic paint that is both dishwasher and machine washer safe. It is perfect for both painting and stenciling and comes in several specialty finishes such as high gloss, satin, metallic, glow-in the dark, and chalkboard.
Martha Stewart Crafts Vintage Decor paint is a high quality paint designed for painting and distressing furniture and home décor accessories. It does not require any project preparation such as priming, sanding, or stripping. It dries to a matte chalk finish, can be finished and polished with waxes, and is formulated for easy sanding and distressing.
How should I apply Mod Podge Sparkle to my project?
It is best to brush a coat of Mod Podge onto the project surface as well as evenly over the back of the paper to be decoupaged. Flip the paper over, place it onto the project surface joining glue to glue; and then press to smooth out any wrinkles or captured air pockets using a Mod Podge Brayer or Squeegee.

For a smooth application of paper to the project surface, use Mod Podge Matte or Gloss to adhere the paper. Although Mod Podge Sparkle can be used to adhere the paper, the added dimension of the glitter particles may interfere if using thin, lightweight paper. Allow to dry 15–20 minutes before applying a topcoat of Mod Podge Sparkle.

For a simple and quick finish, apply a smooth, moderate layer of Mod Podge Sparkle to the decoupaged surface.If additional glitter effects is desired, brush on additional coats allowing ample dry time between applications. If desired, a light spray of Mod Podge Acrylic Sealer can be applied as a final topcoat for additional protection.

NOTE: Mod Podge Acrylic Sealer will alter the sheen of Mod Podge Sparkle.

How should I apply Mod Podge Extreme Glitter to my project?
It is best to brush a coat of Mod Podge onto the project surface as well as evenly over the back of the paper to be decoupaged. Flip the paper over, place it onto the project surface joining glue to glue; and then press to smooth out any wrinkles or captured air pockets using a Mod Podge Brayer or Squeegee.

TIP: For a smooth application of paper to the project surface, use Mod Podge Matte or Gloss to adhere the paper. Although Mod Podge Extreme Glitter can be used to adhere the paper, the added dimension of the glitter particles may interfere if using thin, lightweight paper. Allow to dry 15–20 minutes before applying a topcoat of Mod Podge Extreme Glitter.

For a simple and quick finish, apply a smooth, moderate layer of Mod Podge Extreme Glitter to the decoupaged surface. If additional glitter effects are desired, brush on additional coats, allowing ample dry time between applications. If desired, a light spray of Mod Podge Acrylic Sealer can be applied as a final topcoat for additional protection. NOTE: Mod Podge Acrylic Sealer will alter the sheen of Mod Podge Extreme Glitter.

How shall I apply Martha Stewart Crafts ® Gilding Sheets?
Using the Martha Stewart Crafts white pillow-top Gilding Brush, apply one even thin coat of Martha Stewart Crafts Gilding Adhesive to the prepared project surface. To best achieve a smooth finish and fewer brush strokes, apply Martha Stewart Gilding Adhesive in one direction and then lightly brush perpendicular to that direction while still wet.
Allow adhesive to air dry until surface feels tacky. NOTE: It is best to wear use the Martha Stewart Gilding Gloves while working with the actual gilding sheets as the oils from your skin may discolor or tarnish the metallic sheets. These sheets are VERY lightweight and have a “fly away” tendency. Carefully remove a square gilding sheet and its waxed backing sheet from the pack. Keeping the waxed backing and gilding sheet intact, carefully lay the sheet of gilding directly onto the prepared surface, keeping the backing sheet toward you, gilding sheet down. Using the waxed backing sheet as a protective layer, press and smooth the gilding sheet to the surface by gently rubbing. Lift to remove backing sheet from the gilding sheet. If cracks are found, you can add more gilding to fill in the holes while the adhesive is still wet. Be careful not to disturb the gilding that you have already placed. Allow to dry 1–2 hours. Next, burnish the surface to remove the excess gilding sheet using the natural mop-style gilding brush. If desired, burnish over an open box to capture all loose particles of gilding which can be used on future projects. If desired, finish with Martha Stewart Crafts Gloss Enamel Spray to seal and protect your gilded project. It is not recommended to use a water based sealer because it may tarnish your gilding sheets.
Show 20 40 80
64 result(s)    1 2 3 4 5 6 7     Pages: 7 of 7
Questions? Ask an Expert