A
FolkArt Finishes Barnwood decorated surface can be enhanced with stenciling or decorative painting using
FolkArt Acrylics; however, the Barnwood Wax finish will decrease the level of
paint adhesion. Once the painted embellishment has cured, apply a light misting of
FolkArt...
No, mixing
FolkArt® Outdoor™ with other
paint polymers will compromise the color, durability and other key features of the
paint. Water should not be used with
FolkArt® Outdoor™. Adding water will interfere with the durability and
paint adhesion properties.
FolkArt Flash Iridescent Topcoat does not require a lot of surface prep. The main concern is to have the surface thoroughly cleaned, and basecoated with
FolkArt Acrylics well, prior to applying the topcoat. Wood – Sand smooth any rough areas, apply a basecoat of acry...
No, direct mixing of
FolkArt Glitterific
Paint with other
paint products is not recommended, as it will compromise the color, the finish, and the glittery effect of the
paint.
Yes,
FolkArt Brush Lettering
Paint can be used on outdoor surfaces; however, make sure to seal the project once dried and cured. Otherwise, the metallic finishes will tarnish and become dull when exposed to outdoor elements.
FolkArt® Texture
Paint can be applied with a palette knife, a
paint brush or a stencil brush. When using a
paint brush or stencil brush, use a dabbing motion to get the most textured effect.
FolkArt® Texture
Paint should not be applied to flexible surfaces because it may crack.
Yes, before using, shake or stir Brush Lettering
Paint well to mix until the color is uniform.
Preparing Garments: Wash and dry the garment according to manufacturer's instructions before painting. This will remove sizing and excess dye and guard against shrinkage after painting. Do not use fabric softener. Iron the garment so it's smooth. Using and Placing Pat...
No, it is self sealing. If it will be exposed to the elements outdoors, it should be sealed with
FolkArt® Outdoor Varnish.