No, mixing
FolkArt® Outdoor™ with other
paint polymers will compromise the color, durability and other key features of the
paint. Water should not be used with
FolkArt® Outdoor™. Adding water will interfere with the durability and
paint adhesion properties.
No, direct mixing of
FolkArt Glitterific
Paint with other
paint products is not recommended, as it will compromise the color, the finish, and the glittery effect of the
paint.
Yes,
FolkArt Brush Lettering
Paint can be used on outdoor surfaces; however, make sure to seal the project once dried and cured. Otherwise, the metallic finishes will tarnish and become dull when exposed to outdoor elements.
FolkArt® Texture
Paint can be applied with a palette knife, a
paint brush or a stencil brush. When using a
paint brush or stencil brush, use a dabbing motion to get the most textured effect.
FolkArt® Texture
Paint should not be applied to flexible surfaces because it may crack.
Yes, before using, shake or stir Brush Lettering
Paint well to mix until the color is uniform.
No, it is self sealing. If it will be exposed to the elements outdoors, it should be sealed with
FolkArt® Outdoor Varnish.
When applying the
paint, use enough brush pressure to press the
FolkArt® Fabric™ Brush-on
paint into the fabric, by doing this, you will increase the adhesion of the
paint to the fabric.
Dry time between coats is 1 hour and cure time is 24 hours depending on humidity.
Yes. If you are basecoating concrete, for example for a bird bath or statue, a lime neutralizer is needed. Household vinegar works fine. Coat the concrete with vinegar, let it dry, wash it off, dry thoroughly, then it's ready to
paint. It is not ideal to basecoat a large co...