Email Signup

Subscribe to the PLAID Crafts Newsletter,
and we’ll throw in $10 towards your next purchase.

FAQs

Reset Filter
How long does it take for FolkArt® Extreme Glitter to dry/cure?
FolkArt® Extreme Glitter dries in approximately 20 minutes and cures within 24 hours.
Once applied and dry, will FolkArt® Extreme Glitter rub off or flake off of my project?
No, FolkArt® Extreme Glitter will not rub off or flake off of your project. The base of Extreme Glitter is formulated so that glitter particles are securely adhered to the surface once dry.
Should I apply thin or thick coats of FolkArt® Extreme Glitter?
FolkArt® Extreme Glitter should be applied in thin, even coats to prevent the appearance of brushstrokes.
How should I clean up after using FolkArt® Extreme Glitter?
Clean applicators while wet with soap and water.
If I want to use FolkArt® Extreme Glitter on glass or ceramics for decorative purposes, should I bake the FolkArt® Enamels on the project before I apply FolkArt® Extreme Glitter?
Yes, the FolkArt® Enamels should be baked on the project before applying FolkArt® Extreme Glitter. Follow the instructions on the Enamels label for proper use.
On what surfaces can I use FolkArt® Extreme Glitter?
FolkArt® Extreme Glitter can be used on most porous surfaces including wood, terra cotta and paper mache. It can be used on glass, ceramics for fabric (decorative fabric only).
How should I apply FolkArt® Extreme Glitter?
FolkArt® Extreme Glitter should be applied in thin coats using the tip of a soft bristle brush. A foam brush may also be used, however, some glitter particles may remain in the brush instead of adhering to the project.
What do I do if the FolkArt® Extreme Glitter starts streaking on my project?
If FolkArt® Extreme Glitter starts to streak, allow that coat to dry to the touch - approximately 20 minutes - then brush another thin coat in the opposite direction using a soft bristle brush.
How long should I allow FolkArt® Extreme Glitter to dry between coats?
Allow FolkArt® Extreme Glitter to dry at least 20 minutes between coats or until the base is clear.
How do you clean your FolkArt® Extreme Glitter decorative project?
FolkArt® Extreme Glitter decorative projects should be dusted lightly with a soft brush.
Show 20 40 80
856 result(s)    1 2 3 4 5 6 7 8 9 10 ...    Pages: 2 of 86
Questions? Ask an Expert