Wipe project surfaces with a soft cloth moistened with warm water and mild soap to clean. Consumer furniture polishes are also acceptable for regular cleaning of waxed surfaces.
While still working on your project before the wax has dried, you can remove areas of dark Antiquing Wax. Simply wet the area with Clear Wax and continue to wipe away the undesired excess.
Yes, it is highly recommended that you seal your project to ensure maximum protection. Use Wax to achieve a soft, smooth finish with your choice of Clear, Antique or White. Wax should be applied every 6-12 months or as needed for high traffic surfaces. It is for indoor use o...
Waverly Inspirations
Chalk is best applied using a large bristle brush, like the Waverly Inspirations
Chalk Brush. This helps to work the
paint into all crevices and corners of your project. Brush
paint on using repeated, long swiping motions to achieve a smooth finish. The...
This is perfectly normal and happens overtime as air becomes trapped in the top portion of the
paint bottle after it has been opened. With each use, it's best to remove the clumps before stirring
paint. With each use, it's best to remove the clumps before stirring
paint.
For best results, wait 2 hours between each coat of
paint. Allow 24 hours for
paint to fully cure.
FolkArt One
Decor Paint is a dreamy
paint perfect for all DIYers and Makers who love to refurbish or renew
home decor surfaces. Formulated as a
paint and sealer all in one,
FolkArt One
Decor Paints enable the user to complete projects in less time!
FolkArt One
Decor Paint c...
The Waverly Inspirations
Chalk Brush is great for painting large surface areas. It is specifically designed to hold large amounts of
paint, requiring you to re-load your brush less frequently. The tapered shape of the bristles allows you to easily spread
paint into tiny groo...
FolkArt One
Decor Paint should be cleaned from your brushes and/or tools using soap and water immediately after each use.
It's easy to achieve a distressed look with Waverly Inspirations
Chalk. Once top coat of
paint has dried, simply sand the surface with sandpaper until the base coat of
paint or the raw surface shows through. When satisfied with the distressed look, wipe project surface with...