Dry time between coats is 1 hour and cure time is 24 hours depending on humidity.
Yes. If you are basecoating concrete, for example for a bird bath or statue, a lime neutralizer is needed. Household vinegar works fine. Coat the concrete with vinegar, let it dry, wash it off, dry thoroughly, then it's ready to
paint. It is not ideal to basecoat a large co...
FolkArt® Texture
Paint can be used on wood, terra cotta, paper mache, Styrofoam and most porous surfaces.
Yes, you can create custom colors by mixing any number of the Waverly Inspirations
Chalk paints together. Start with the lightest color, adding in darker shades until desired color is achieved.
No, direct mixing of
FolkArt Pre-Mixed Pouring
Paint with other
paint products will compromise the color, the finish as well as the ability to achieve the desired marbled effect.
FolkArt Sign Shop Erasable Liquid
Chalk is easy to remove. Simply dampen a sponge or paper towel and wipe the
paint away. Then use a dry paper towel to completely remove the
paint from the surface. Once completely dry, always re-condition the chalkboard surface before creat...
Yes, projects using
FolkArt Brush Lettering
Paint should be sealed with a clear acrylic spray sealer to protect the project surface and to keep the
paint’s metallic colors tarnish-resistant. After the
paint has dried and cured, very lightly spray the project surface, then wai...
FolkArt Brush Lettering
Paint takes up to an hour to dry completely and takes approximately 48 hours to cure on a surface.
FolkArt® Shinys are a line of high gloss paints that are heavily pigmented just like the original
FolkArt® Acrylics. They were created to allow consumers to achieve a “shiny” finish without applying a varnish or sealer.
No, although
FolkArt Color Shift Acrylic
Paint is water-based, the use of water to thin the
paint is not recommended as it will reduce the adhesion properties of the
paint.