Place both parts into a warm water bath of 80°F, but be aware that the working time will be less than 20-30 minutes. 8.5.7
While the two transfer mediums achieve the same end, they are two different formulas, each with their own applications. Learn more about the differences between the two
Mod Podge Photo Transfer Mediums .
Mod Podge Resin works best with all types of molds. Some molds like a silicone mold will not require a mold release agent, while other types of molds made of plastic polypropylene or polyethylene sheet plastic will require a mold release agent 8.5.7
It is best to brush a coat of
Mod Podge Pearl onto the project surface as well as evenly over the back of the paper to be decoupaged. Flip the paper over, place it onto the project surface joining glue to glue, and then press to smooth out any wrinkles or captured air pockets...
Clean all
Mod Podge applicator tools (brushes, squeegee and/or brayer) while wet with soap and water.
A light background works best. If you have a surface that is fairly dark, basecoat it first with your choice of FolkArt Outdoor Acrylics. Cut the design out of the Napkin, separate the layers and discard the two bottom white layers. Using the Glue Brush, apply a coat of ...
It is best when pouring
Mod Podge Resin, to do so slowly and gently. This will keep bubbles from forming. After pouring
Mod Podge Resin, it is best to let the project sit for five minutes to allow any bubbles to rise to the surface. And some bubbles will form, however, they ca...
Mod Podge Hard Coat is great to use for projects that will be handled frequently or those in a high traffic area.
The best position to hold the
Mod Podge Photo Transfer Tool while in use is to hold it like a pencil, while holding the tool upright at a 90° angle to the surface.
Mod Podge Silicone Molds are non-stick and do not require the use of a releasing agent making them the perfect mold to use when crafting with
Mod Podge Resin or other crafting substances. 8.5.7