The surface should be “conditioned” before use. To condition the surface, wait 24 hours (recommended cure time) after the last
coat of paint. Lay a piece of chalk on its side and rub on surface side to side. Dampen a paper towel with water and wipe the surface to remove ch...
On well-used furniture items such as chairs, tables, or dressers, etc., it is a good idea to reapply the finish with a fresh
coat of Clear Wax once a year. It is not necessary to reapply wax to decorative or slightly used items.
Yes. If you are basecoating concrete, for example for a bird bath or statue, a lime neutralizer is needed. Household vinegar works fine.
Coat the concrete with vinegar, let it dry, wash it off, dry thoroughly, then it's ready to paint. It is not ideal to basecoat a large co...
With a medium
coat of Mod Podge Ultra, the project should cure within 24 hours. Allow for longer curing times if applying thicker coats.
Once Mod Podge Resin has been completely cured, it can be decorated or embellished with paint, markers, ink, and more. Once decorated, it is recommended that the surface be protected by pouring a thin top
coat of clear Mod Podge Resin over the decorated surface. 8.5.7
First check to see if the napkin is 2 ply. If so, separate and lay aside. Brush Mod Podge directly on the your surface. Carefully place the printed napkin on the surface and lightly blot down with a dampened sponge. Start blotting in the center and work to the edge. Once it ...
With a medium
coat of Mod Podge, the project should cure in about 2 to 3 weeks. Allow for longer curing times if applying more or thicker coats.
You should wait at least 1 hour before applying an additional
coat of FolkArt® Shinys.
First, prepare your project surface. Then using the Martha Stewart Crafts Soft Bristle Decoupage Brushes, apply one even, smooth
coat of Martha Stewart Crafts Fabric to Fabric Decoupage Finish to the area on the selected fabric surface that you would like to decoupage. For t...
Single
coat coverage for one 8 oz. jar is 10.75 sq. ft. Since at least two coats are recommended, one jar will cover approximately 5.25 sq. ft.