Inbox Inspiration

Subscribe to the PLAID Crafts Newsletter,
and we’ll throw in $10 towards your next purchase.

FolkArt ® Milk Paint™ Finishing Oil, 3.7 oz.

Item # 38938 $7.99 Item available exclusively at Walmart.

Used over FolkArt Milk paint, this finishing oil offers exceptional protection from the inside out. Non-toxic and solvent-free, the oil is absorbed into porous surfaces and provides a durable finish. It penetrates the surface to form a final coat of protection without leaving a film that will chip or scratch. Great for raw, stained, or Milk-painted wood, this finishing oil is mineral based and cleans up easily with soap and water.

Size: 3.7 oz.

products
description

Used over FolkArt Milk paint, this finishing oil offers exceptional protection from the inside out. Non-toxic and solvent-free, the oil is absorbed into porous surfaces and provides a durable finish. It penetrates the surface to form a final coat of protection without leaving a film that will chip or scratch. Great for raw, stained, or Milk-painted wood, this finishing oil is mineral based and cleans up easily with soap and water.

faqs
What is FolkArt Milk Paint Finishing Oil?
FolkArt Milk Paint Finishing Oil will absorb directly into the pores of a raw or FolkArt Milk Paint decorated surface creating a velvety smooth finish. It also enhances the look of natural unfinished wood. FolkArt Finishing Oil is non-toxic and can be cleaned up easily with soap and water. One 3.7 fl. oz. bottle will cover approximately 15 square feet.
How should I apply FolkArt Milk Paint Finishing Oil?
FolkArt Milk Paint Finishing Oil should be applied to a milk painted surface using a soft, lint-free cotton cloth which has been saturated with the finishing oil. Rub surface gently until the oil is absorbed, if necessary, wipe to remove excess. While oil is being absorbed, lightly wet sand using a fine grit (280 – 400 grit) sandpaper creating the velvety smooth finish. Surfaces that have been oiled will take approximately 30 days to fully dry and cure.
FolkArt Milk Paint Finishing Oil can be applied to lightly used or decorative surfaces, however, heavily used surfaces should be protected with FolkArt Milk Paint Bonding Primer & Sealer.
When is it advisable to use FolkArt Finishing Oil or FolkArt Bonding Primer & Sealer after completing a project painted with FolkArt Milk Paint?
Whether you use Finishing Oil or Bonding Primer & Sealer depends on the surface you’re using.
  • FolkArt Finishing Oil is best used on a surface that has been painted with FolkArt Milk Paint directly over raw, unfinished wood. FolkArt Finishing Oil will penetrate the layers of milk paint as well as into the unfinished wood surface. NOTE: The color of FolkArt Milk Paint painted surfaces will slightly darken and become rich in color after the finishing oil has been absorbed. If desired, test for any color changes in an inconspicuous place.
  • FolkArt Bonding Primer & Sealer is best used on a surface has been previously finished either, painted or stained, and has been sealed with a varnish. It is recommended to use FolkArt Bonding Primer & Sealer over the surface, before painting, as well as after completing the project. NOTE: Be sure to allow ample dry time after applying the priming coat before painting and again after completing the project before applying the protective coat.