Other Supplies
Palette or palette paper, Painter’s tape, Pencil, Soap, Stylus, Tracing paper, Transfer paper, Water basin, Paper towels, Rubbing alcohol, 3/4" flat brush, #1 liner brush, ½” dauber, 1/4" dauber, Unfinished wood frame 11” x 12 ½” (5” x 7” opening), White ceramic plate, Ashland™ candleholder/charger #043431, Stemmed wine glass
Instructions
-
Basecoat the wood frame Wicker White
-
Wash ceramic plate and wine glass with soap and water, dry and wipe with rubbing alcohol to remove any residue.
-
Trace the pattern onto tracing paper.
-
Paint the candle holder/charger Licorice using flat brush.
-
Tape off approximately one third of the frame from the top. Paint the bottom two thirds Licorice. Let dry.
-
Tape a rectangle onto wine glass one inch from lip. Apply several coats of Wicker White with dauber. Remove tape and let dry.
-
Apply stencil design elements onto frame and under side of glass base using dauber and Wicker White. Let glass base dry thoroughly.
-
Apply second round of design elements onto frame, glass and ceramic plate using Licorice. Turn glass over and apply Licorice to entire base covering white design element. Apply several coats if needed.
-
Transfer word pattern onto frame referring to photo for placement. Paint using liner brush in Licorice.
-
Finish by stenciling small flourish at the end of painted word.
-
Allow all surfaces to thoroughly cure by referring to paint bottle label.
Get the Pattern