Mod Podge
Resin is FDA certified food safe when properly mixed following the instructions provided with the product. 8.5.7
There is very minimal shrinkage with Mod Podge
Resin. 8.5.7
Yes, cured Mod Podge
Resin is waterproof. 8.5.7
Mod Podge
Resin is self-leveling. It is very important to make sure your working surface is level. 8.5.7
You can pour up to one quarter inch (1/4”) thick for each layer. 8.5.7
Place both parts into a warm water bath of 80°F, but be aware that the working time will be less than 20-30 minutes. 8.5.7
Once Mod Podge
Resin has been completely cured, it can be decorated or embellished with paint, markers, ink, and more. Once decorated, it is recommended that the surface be protected by pouring a thin top coat of clear Mod Podge
Resin over the decorated surface. 8.5.7
Yes, Mod Podge
Resin can be applied to a surface in layers. The second layer can be applied once the first layer has set. This could be one to two hours, depending upon the humidity level and temperature in the room. 8.5.7
Mod Podge
Resin is heat resistant up to 110° F. If exposed to higher temperatures, a Mod Podge Resign project may yellow. Note: Mod Podge
Resin is NOT recommended for decorative hot plates. 8.5.7
Mod Podge
Resin should not freeze as the product is not water-based and should be used in temperatures of 70°F. If either the Mod Podge
Resin or Hardener bottles are cold to the touch, it is best to place the bottle in a warm water bath for several minutes to bring the product...
Although Mod Podge
Resin may appear similar to what is found in the marketplace, it has a superior lightfastness quality and dries to a hard, clear gloss finish that the leading products do not have. Mod Podge
Resin is also FDA certified food safe, has low VOCs, and is made in...
The best colorants for Mod Podge
Resin are Mod Podge Alcohol Inks, glitters, mica flakes, mica powders, and more. It is best to use products that are not water-based. However, if you do use a water-based colorant, use it sparingly and make sure to mix thoroughly with the
resin...
A Mod Podge Resign project will begin drying within the first 24 hours. However, a Mod Podge
Resin project will be fully cured after 7 days. 8.5.7
Mod Podge
Resin has a working time of 20 - 30 minutes. During this time, you can mix in additives such as alcohol inks or glitters. 8.5.7
It is best when pouring Mod Podge
Resin, to do so slowly and gently. This will keep bubbles from forming. After pouring Mod Podge
Resin, it is best to let the project sit for five minutes to allow any bubbles to rise to the surface. And some bubbles will form, however, they ca...
Mod Podge
Resin works best with all types of molds. Some molds like a silicone mold will not require a mold release agent, while other types of molds made of plastic polypropylene or polyethylene sheet plastic will require a mold release agent 8.5.7
Yes, the hardener part of the Mod Podge
Resin will yellow over time. The product has a shelf life of one year unopened and 6 months lifespan opened. Remember to always close the lid on the hardener right after each use and store in a dark area. Exposure to air and sunlight wil...
Wipe down all surfaces while the Mod Podge
Resin mixture is still wet. Use paper towels to clean up measuring cups, mixing cups, and any mixing tool which can be saved and reused on other Mod Podge
Resin projects. 8.5.7
To mix Mod Podge
Resin, begin by measuring out equal amounts of
Resin and Hardener – (measure by volume not weight). Use a separate measuring cup for each part. Once equal amounts of both parts are measured, pour them into a mixing cup. Gently stir the two parts together for 3...
When working with Mod Podge
Resin, it is recommended to wear personal protective equipment, such as disposable nitrile gloves, protective clothing, a respirator, and safety goggles. You can even use a cream barrier on your skin in addition to wearing gloves. It is advisable to...