DIY Hanging Planter

Other Supplies

• Wooden Bowl
• 3/8” Twine Rope
• Thin Twine String
• Drill
• 3/8” Drill Bit
• Craft Glue
• Ruler
• Tape

Instructions

1. Tape off the edge of bowl and paint Wicker White.
2. Paint four rows of dots with liner brush in the Ink Spot.
3. On the last two rows paint lines going straight down to make it appear like the paint is dripping.
4. Drill four equally spaced holes with drill.
5. Cut four equal lengths of 3/8” twine.
6. Tape off one end of the twine and feed though the holes.
7.  Fold rope and cut a piece of the twine string and tie it around folded rope close to the rim of the bowl.  Trim the string.
8. Add some glue to one of the rope pieces in the fold.
9. Begin wrapping the string around the two pieces of rope.  Add glue at the end of the string when finished wrapping and press down to secure. 
10. Hold all the ropes at the top of each and fold over about a foot. 
11. Tie string around the top and the bottom of the fold but leave enough at the fold for a loop for hanging.
12. Add glue to in between each tied string as shown in photo.
13. Wrap string around the ropes same as the single pieces of rope.