Instructions
- Remove the hardware from the back of the pallets.
- Basecoat the pallets with Nutmeg. Allow them to dry and then sand to distress.
- Cut four 24" pieces of rope and four 12" pieces of rope.
- Tie a knot in one end of each rope. Thread the long pieces of rope through the top space between the first two slats on the vertical pallet.
- Thread the shorter pieces through the bottom two slats on the vertical pallet.
- Attach the horizontal pallet by threading the rope pieces through the front of the pallet through the same slats as the vertical pallet. Tie a knot. Adjust the knots so the horizontal pallet is flat. The two pallet should now be at a 90° angle.
