Marbelous Easter Egg

Instructions

1. Remove hanger and cap from the egg. Rinse inside of egg with alcohol. Let dry completely. No moisture should be inside ball. Start with one color of Ceramcoat paint. Squeeze just a small amount of the first color into the egg so it runs down the side. Rotate the egg and squeeze a little more paint down the side in another area until you've added about three or four lines of paint with only a dime-size amount of paint pooling at the bottom of the egg.
    
2. Add the next color, squeezing out a small amount of paint in between the places where you added the first color. Continue to add one or two more colors in the same fashion.
    
3. Rest the egg on its side for approximately five minutes. (Place it to rest in the egg box it came in, an egg carton or a paper cup for easy handling.) Rotate and tilt the egg a quarter turn every five to ten minutes until the paint covers the entire inside of the egg. Pour out excess paint. Then continue to rotate it every few hours over the next day. This helps the paint to coat the egg evenly. The color will continue to move and change with each turn. When the desired effect has been achieved, drain out any remaining excess paint. It may take up to five days to dry completely (a hair dryer will speed drying time). Replace hanger and cap when dry. If desired, decorate with ribbon.