Use FolkArt Home Decor Chalk to transform a wooden side table into a two-toned accent piece.
Instructions
- Lightly sand the unfinished occasional table which will open the wood pores and ensure a smooth surface for painting.
- Wipe down the unfinished table surface removing sanding dust.
- On the table top, measure and mark a 2" border from the edge. Also measure and mark approximately 7" (up from the bottom) on each table leg.
- Apply stencil tape or painters tape along the marked measurements.
- Next, pour a small amount of FolkArt Home Decor Chalk - Glacier into a foam bowl.
- Apply a coat of Glacier to the center of the table top. Allow to dry 30 minutes, then reapply a second application of chalk paint. Let dry once more then remove the tape on the table top.
- Next, paint FolkArt Home Decor Chalk - Nautical on the outer rim of the table top as well as down all four legs to the tape line. Allow to dry 30 minutes.
- Reapply a second coat of Nautical. Once again allow to dry, then remove tape.
- Using the Sanding Block, lightly sand the inner square to create a slightly weathered effect.
- Apply FolkArt Home Decor Wax to the entire table.
