Mod Podge Resin Beach Pouring Plaque

Instructions

1. Paint the recess of the plaque with Wicker White.
2. Paint the raised area of the plaque with Yellow Ochre and Vintage White. Paint Yellow Ochre on the outer edges and blend into Vintage White towards the center. Let dry.
3. Spray the raised areas of the plaque with Mod Podge Ultra- Matte. Sprinkle sand and seashells where desired and allow to dry fully.
4. Tape off the open sides of the recessed area of the plaque.
5. Protect your workspace and put on the proper PPE according to the information on Plaidonline.com/ModPodgeResin.
6. Mix the Mod Podge Resin according to the instructions on plaidonline.com/ModPodgeResin.
7. Separate the resin into 3 separate cups. In the first cup, add a drop of Calypso Sky. In the second cup, add a drop of Cascade. In the last cup, add a drop of Teal. Stir each cup until the paint is fully combined into the resin.
8. Pour the 3 colors of resin in stripes into the recessed area. Use a craft stick to blend the colors together. Allow to cure for 24 hours before removing the tape.