Cheers Etched Wine Bottle

Instructions

1. Clean bottle with rubbing alcohol to remove any oils or dirt.
2.  Place enough masking tape onto bottle so that the word “CHEERS” will fit within the tape.
3. Trim down CHEERS from the printout to fit onto the tape.  Tape it into place with the scotch tape.
4. Use the craft knife to begin cutting out the letters.  Make sure the knife is going all the way through the paper and the masking tape.
5. Remove the letters from the masking tape.
6. Apply the etching cream with a brush.  Be generous with the cream.  Make sure all the letters are completely covered. 
7. Let cream set for 15 minutes. 
8. Wash off cream completely and remove tape.