FolkArt Ultra Dye is best used as a brush-on dye on any porous surface such as unfinished wood, non-sealed baskets, burlap and most unfinished natural fibers.
For added protection, it is recommended to seal a FolkArt Ultra Dye project. A project created using only one color should be sealed with one brush-on application of FolkArt Ultra Dye Satin Varnish. A multi-color or stenciled project created using FolkArt Ultra Dye should be...
When brushing on the dye, use a long, sweeping motion to evenly distribute the color rather than many short choppy strokes which can create dye splatters. Allow the dye to penetrate the surface, then wipe off excess dye with a soft paper towel. If desired, repeat the dye app...
When stenciling with FolkArt Ultra Dye, it is best to use a dry brush technique. Make sure your stencil brush is properly loaded and excess dye has been removed. Stencils can be taped or held in place. Hold the stencil brush vertically, keeping the flat portion of the bristle...
When stenciling with FolkArt Ultra Dye, it is best to use a dry brush technique. Make sure your stencil brush is properly loaded and excess dye has been removed. Stencils can be taped or held in place. Hold the stencil brush vertically, keeping the flat portion of the bristle...
Depending on exactly how porous your project surface is, how much dye is applied and how humid your work area is, FolkArt Ultra Dye can dry to the touch within 15 minutes to an hour. It will take approximately 24 hours before it is totally cured to the surface.
You should have your prepared project surface, desired shade of FolkArt Ultra Dye, FolkArt Ultra Dye Brushes, plastic gloves, paper towels, craft knife and foam bowls. Protecting your work surface with a sheet of plastic or an old vinyl tablecloth is also recommended. It is ...
Yes, FolkArt Ultra Dye may permanently dye clothing. It is suggested that while creating with FolkArt Ultra Dye, wear old or protective clothing as well as plastic gloves.
FolkArt Flash Iridescent is a water-based, easy-to-brush-on, clear multi-surface topcoat that when applied to a painted surface, will produce a metallic luster. This metallic luster will shift colors when the direction of light on the top coated surface changes, because FolkA...
FolkArt Flash Iridescent Topcoat can be applied to most paintable craft surfaces such as wood, terra cotta, stretched canvas, rigid plastic, papier mache, metal, bisque ware or unglazed ceramics, glass and ceramics. However, the color shifting properties of this amazing topco...