Lightly wipe your Mod Podge Ultra project with a dampened, lint-free rag. The surface cannot be scrubbed or washed.
A wet spill on fabrics must be washed immediately with soap and water when wet. If allowed to dry, the Mod Podge Ultra will set and will not be removable from clothing.
To mix Mod Podge Resin, begin by measuring out equal amounts of Resin and Hardener – (measure by volume not weight). Use a separate measuring cup for each part. Once equal amounts of both parts are measured, pour them into a mixing cup. Gently stir the two parts together for 3...
When working with Mod Podge Resin, it is recommended to wear personal protective equipment, such as disposable nitrile gloves, protective clothing, a respirator, and safety goggles. You can even use a cream barrier on your skin in addition to wearing gloves. It is advisable to...
When working with Mod Podge Resin, it is best to work in a room that is well ventilated with fresh air and work in temperate 70°F. Make sure your work table is level and is covered with wax paper or a large plastic sheet. This will make it easier to wipe away resin and harden...
Mod Podge Resin has a working time of 20 - 30 minutes. During this time, you can mix in additives such as alcohol inks or glitters.
8.5.7
Mod Podge Resin works best with all types of molds. Some molds like a silicone mold will not require a mold release agent, while other types of molds made of plastic polypropylene or polyethylene sheet plastic will require a mold release agent
8.5.7
The best way to incorporate Mod Podge Alcohol Inks into a mixed Mod Podge Resin is to add 1 drop of Alcohol Ink, at a time, and stir after each drop has been added to ensure the colors are completely mixed with the resin. Additional drops can be added as needed to achieve the ...
It is best when pouring Mod Podge Resin, to do so slowly and gently. This will keep bubbles from forming. After pouring Mod Podge Resin, it is best to let the project sit for five minutes to allow any bubbles to rise to the surface. And some bubbles will form, however, they ca...
You can pour up to one quarter inch (1/4”) thick for each layer.
8.5.7