Pre-wash and dry fabric. This will remove the sizing that comes in new fabric and help the
paint bond better with the fibers. Place and secure fabric over a plastic-covered or waxed cardboard to create a firm surface for stenciling and to prevent bleed-through to any other ...
A shaded stencil print is a stenciled out image of the design with a lighter tone at the center of the print and a darker, more opaque tone around the edge of the cutout area. Shading is achieved with varying degrees of pressure or with complementary or contrasting colors of...
When designing home décor projects, the first step is to design and place each section of the
FolkArt Sign Shop Mesh Stencil where desired. Remove the mesh stencil from the backing sheet. Press in place with the adhesive side towards the smooth surface. Next, apply a small ...
FolkArt Dragonfly Glaze does not require a lot of surface prep. The main concern is to have the surface thoroughly cleaned, and basecoated a color well, prior to applying the glaze. Wood – Sand smooth any rough areas, apply a basecoat of acrylic
paint; allow to dry. Ligh...
FolkArt Design Creme can be applied to many different types of surfaces such as wood, terra cotta, metal/tin, canvas, paper mache and plaster. It can also be applied to ceramic and/or glass surfaces for decorative purposes only as the
paint is not dishwasher safe. .tb_butto...
No,
FolkArt Sign Shop Multi-Surface Chalkboard
Paint should not be mixed with water, mediums or other acrylic paints. Mixing will destroy the properties that make this
paint work as a chalkboard surface. .tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b...
No, it is not necessary to shake or stir the open jar of
FolkArt One Decor
Paint. 8.5.7 .tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b;border-left: 1px solid #FFF;border-bottom: 1px solid #fff;}.tb_button.hover {borer:2px outset #def; background-c...
FolkArt Flash Iridescent Topcoat does not require a lot of surface prep. The main concern is to have the surface thoroughly cleaned, and basecoated with
FolkArt Acrylics well, prior to applying the topcoat. Wood – Sand smooth any rough areas, apply a basecoat of acry...
It is advisable to wait until the first
paint application is thoroughly dry prior to layering a second part of the stencil design. Layering a stencil while wet will ensure a mistake of blurred
paint.
You may try adding weight to the dry stencil between uses. Lay a sheet of waxed paper over the stencil then load it up with heavy books, etc.