FolkArt®
Extreme Glitter dries in approximately 20 minutes and cures within 24 hours.
FolkArt Extreme Glitter decorative projects should be dusted lightly with a soft brush.
No,
FolkArt®
Extreme Glitter will not rub off or flake off of your project. The base of
Extreme Glitter is formulated so that glitter particles are securely adhered to the surface once dry.
FolkArt®
Extreme Glitter can be used on most porous surfaces including wood, terra cotta and paper mache. It can be used on glass, ceramics for fabric (decorative fabric only).
FolkArt®
Extreme Glitter should be applied in thin coats using the tip of a soft bristle brush. A foam brush may also be used, however, some glitter particles may remain in the brush instead of adhering to the project.
If
FolkArt®
Extreme Glitter starts to streak, allow that coat to dry to the touch - approximately 20 minutes - then brush another thin coat in the opposite direction using a soft bristle brush.
Allow
FolkArt®
Extreme Glitter to dry at least 20 minutes between coats or until the base is clear.
There is no set number of coats of
FolkArt®
Extreme Glitter that need to be applied. For best results, at least 3 thin coats should be applied. Too many coats of
Extreme Glitter can dull the overall glitter effect.
Clean applicators while wet with soap and water.
Yes, you can speed up the drying process of
FolkArt Extreme Glitter by using a fan or a hair dryer on the lowest setting.