Glitterific
Paint does not require much surface prep; make sure to have cleaned your project surface thoroughly before applying. Wood – If desired, sand smooth any rough areas prior to painting. Apply Glitterific directly to raw wood or to a wood surface that has alread...
If basecoating concrete such as a statue, a lime neutralizer is needed. Household white vinegar works fine. Coat concrete with vinegar, let dry, rinse well and dry thoroughly before painting. The
paint is not recommended for large concrete areas subject to foot traffic suc...
Paints are rated on a light-fastness scale that runs from 1 to 5. 1=Excellent 2=Very good 3=Good 4=Fair 5=Poor All
FolkArt Home Decor Chalk colors are rated Excellent or Very Good (1 or 2). This
paint is made using very high quality pigments, which results in its superior qua...
No,
FolkArt Extreme Glitter does not have to be sealed unless the project will be displayed outdoors.
A variety of miscellaneous tools can be used to create
paint poured or marbled effects using
FolkArt Pre-Mixed Pouring Paints. Tools to swirl paints such as: Popsicle sticks, wood skewers, an artist stylus, etc are all helpful. Push pins, raised platforms, or tin cans or bott...
No. The design on your Bucilla Baby project has been stamped on the
fabric with a wash-out ink.
Some of the
FolkArt® Extreme Glitters use a tinted base to give the glitter a more uniform look when it dries. This also allows the user to apply the Extreme Glitter directly to a project without applying a basecoat.
FolkArt® Enamels are non-toxic,however it is best to keep painted designs and food serving areas separate so that
paint never comes into contact with food. When painting a plate for actual use, you must
paint on the back using a method called Reverse Painting. Reverse painti...
Clean all brushes and tools while
paint is still wet with warm soapy water. Rinse well, reshape your brushes and allow to dry.
Creating the distressed look is easy and can be achieved using one color application or a multiple color application. Once the top application of
paint is dry, simply begin sanding to distress using medium grit sandpaper. Sanded or distressed areas are usually found on surfa...