Clean glass or glazed ceramics with alcohol. Shake
paint before applying.
Paint design. For best results use Clear Medium over your design to help ensure there is enough
paint for the design to properly adhere to your surface. Do not wet paintbrush with water. To change c...
You can create the look of weathered moss by adding water to the
FolkArt Shortie Brush and dabbing the moistened bristles randomly into the wet moss texture
paint. The water will allow some of the moss
paint to run or drip. NOTE: Be sure to hold the project surface upright ...
FolkArt Enamels dry to a translucent to opaque finish. However, if you’d like to create a more transparent look, combine one part
FolkArt Enamels with one part
FolkArt Clear Medium.
Paint as normal.
No,
FolkArt Extreme Glitter should not be mixed with extender or water as this will dilute the glitter content and reduce the adhesion of the
paint to the surface.
Clean
FolkArt Laser-Cut Painting Stencils with cool water while the
paint is still wet. To remove dried
paint from the stencil, use a paper towel dampened with rubbing alcohol. Rub gently to avoid tearing the stencil.
FolkArt Painted Finishes Barnwood can be easily cleaned from used
paint brushes while the bristles are still wet using soap and warm water.
FolkArt® Shinys can be applied to unprimed porous surfaces, however, painting on a primed surface will reduce the number of coats required for a shiny finish. The initial coat on an unprimed surface may not appear shiny because the
paint is absorbed into the surface. The sh...
If your
paint has settled, simply shaking the
FolkArt Painted Finishes bottles will fully incorporate the
paint.
If your
paint has settled, simply shaking the
FolkArt Painted Finishes Rust bottles will fully incorporate the
paint.
If your
paint has settled, simply shaking the
FolkArt Painted Finishes Moss bottles will fully incorporate the
paint.