Yes, before using, shake or stir Brush Lettering
Paint well to mix until the color is uniform.
When applying the
paint, use enough brush pressure to press the
FolkArt® Fabric™ Brush-on
paint into the fabric, by doing this, you will increase the adhesion of the
paint to the fabric.
Dry time between coats is 1 hour and cure time is 24 hours depending on humidity.
Yes. If you are basecoating concrete, for example for a bird bath or statue, a lime neutralizer is needed. Household vinegar works fine. Coat the concrete with vinegar, let it dry, wash it off, dry thoroughly, then it's ready to
paint. It is not ideal to basecoat a large co...
FolkArt Home Décor Chalk
paint will dry to the touch almost immediately, however it will take 24 hours before fully cured to the surface.
No, direct mixing of
FolkArt Pre-Mixed Pouring
Paint with other
paint products will compromise the color, the finish as well as the ability to achieve the desired marbled effect.
Yes, projects using
FolkArt Brush Lettering
Paint should be sealed with a clear acrylic spray sealer to protect the project surface and to keep the
paint’s metallic colors tarnish-resistant. After the
paint has dried and cured, very lightly spray the project surface, then wai...
FolkArt Brush Lettering
Paint takes up to an hour to dry completely and takes approximately 48 hours to cure on a surface.
FolkArt® Shinys are a line of high gloss paints that are heavily pigmented just like the original
FolkArt® Acrylics. They were created to allow consumers to achieve a “shiny” finish without applying a varnish or sealer.
Plaid does not use any natural rubber latex in any of its current
paint products. Plaid’s
paint products are manufactured using synthetic acrylic resins.