First, prepare your project surface. Then using the Martha Stewart Crafts Soft Bristle Decoupage Brushes, apply one even, smooth
coat of Martha Stewart Crafts Decoupage Finish of your choice to the surface. Apply one smooth, even application of the Martha Stewart Crafts Dec...
It is best to brush a
coat of Mod Podge onto the project surface as well as evenly over the back of the paper to be decoupaged. Flip the paper over, place it onto the project surface joining glue to glue; and then press to smooth out any wrinkles or captured air pockets using...
It is best to brush a
coat of Mod Podge onto the project surface as well as evenly over the back of the paper to be decoupaged. Flip the paper over, place it onto the project surface joining glue to glue; and then press to smooth out any wrinkles or captured air pockets using...
To use napkins with Fabric Mod Podge, follow the steps below: Cut the design out of the Napkin and discard the layers. Place Napkin upside down on a piece of parchment or wax paper. Apply Fabric Mod Podge® to the back of the design. Place the Napkin and paper face-...
Some papers such as gift wrap and magazine cutouts will warp and bubble after applying Mod Podge. To minimize the warping, spray the front and back of these papers with an acrylic sealer such as Mod Podge Acrylic Sealer, and let dry. Be sure to test the sealer first on the pa...
The type of surface you're using will dictate the preparation method. Wood : Sand smooth with fine grit sandpaper, wipe away sawdust. Tin : Wash with soap and water; wipe with white vinegar dampened cloth, then rinse with water and let dry completely. Glass/Ceramic ...
FolkArt Gesso should be brushed directly onto the chosen surface using long smooth brushstrokes. It is best to apply a light
coat of Gesso, allow it to dry and then reapply a second application again using long smooth strokes. .tb_button {padding:1px;cursor:pointer;border-ri...
When brushing a light, smooth
coat of FolkArt Gesso to a surface, allow approximately 10 to 20 minutes for the application of Gesso to dry. .tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b;border-left: 1px solid #FFF;border-bottom: 1px solid #fff;}.tb_bu...
The surface should be “conditioned” before use. To condition the surface, wait 24 hours (recommended cure time) after the last
coat of chalkboard paint. Lay a piece of chalk on its side and rub the painted surface from side to side covering the entire chalkboard painted surf...
No, it is self-sealing, meaning a varnish or top
coat is not necessary. However, if an outdoor project will be exposed to the severe weather elements outdoors, it should be sealed with FolkArt Outdoor Varnish. .tb_button {padding:1px;cursor:pointer;border-right: 1px solid #...