FolkArt® Texture
Paint can be applied with a palette knife, a
paint brush or a stencil brush. When using a
paint brush or stencil brush, use a dabbing motion to get the most textured effect.
FolkArt® Texture
Paint should not be applied to flexible surfaces because it may crack.
Yes, before using, shake or stir Brush Lettering
Paint well to mix until the color is uniform.
No, it is self sealing. If it will be exposed to the elements outdoors, it should be sealed with
FolkArt® Outdoor Varnish.
Dry time between coats is 1 hour and cure time is 24 hours depending on humidity.
You must pre-wash, dry and iron the
fabric. DO NOT use
fabric softener. If using a t-shirt or a thin
fabric, place a piece of wax paper inside directly under where you will be decoupaging your design.
Yes. If you are basecoating concrete, for example for a bird bath or statue, a lime neutralizer is needed. Household vinegar works fine. Coat the concrete with vinegar, let it dry, wash it off, dry thoroughly, then it's ready to
paint. It is not ideal to basecoat a large co...
FolkArt® Texture
Paint can be used on wood, terra cotta, paper mache, Styrofoam and most porous surfaces.
FolkArt Home Décor Chalk
paint will dry to the touch almost immediately, however it will take 24 hours before fully cured to the surface.
No, direct mixing of
FolkArt Pre-Mixed Pouring
Paint with other
paint products will compromise the color, the finish as well as the ability to achieve the desired marbled effect.