FolkArt Painted Finishes FAQ

You can create the look of weathered moss by adding water to the FolkArt Shortie Brush and dabbing the moistened bristles randomly into the wet moss texture paint. The water will allow some of the moss paint to run or drip.

NOTE: Be sure to hold the project surface upright to allow the drips to run in the direction as they naturally would do. FolkArt Painted Finishes Moss can be painted as an embellishment to a previously painted FolkArt Painted Finish such as: Cement or Barnwood.

A FolkArt Finishes Barnwood decorated surface can be enhanced with stenciling or decorative painting using FolkArt Acrylics; however, the Barnwood Wax finish will decrease the level of paint adhesion.

Once the painted embellishment has cured, apply a light misting of FolkArt clear acrylic sealer in desired finish to seal and protect.

If your paint has settled, simply shaking the FolkArt Painted Finishes bottles will fully incorporate the paint.

If your paint has settled, simply shaking the FolkArt Painted Finishes Moss bottles will fully incorporate the paint.

If your paint has settled, simply shaking the FolkArt Painted Finishes Rust bottles will fully incorporate the paint.

FolkArt Painted Finishes Barnwood can be easily cleaned from used paint brushes while the bristles are still wet using soap and warm water.

FolkArt Painted Finishes Concrete can be easily cleaned from used paint brushes while the bristles are still wet using soap and warm water.

FolkArt Painted Finishes Moss can be easily cleaned from used paint brushes while the bristles are still wet using soap and warm water.

FolkArt Painted Finishes Rust can be easily cleaned from used paint brushes while the bristles are still wet using soap and warm water.

FolkArt Painted Finishes Concrete is available in two colors: Light Concrete and Dark Concrete.

FolkArt Painted Finishes Moss is available in two colors, Light Moss and Dark Moss.

FolkArt Painted Finishes Rust is available in two colors, Light Rust and Dark Rust.

One 4 fl. oz. bottle of FolkArt Painted Finishes Moss will cover approximately 3 square feet of surface.

When combining Light and Dark Moss 4 fl. oz. bottles, approximately 6 square feet of project surface can be covered.

One 2 fl. oz. bottle each of FolkArt Painted Finishes Barnwood Tint and Barnwood Wax together will cover approximately 4 sq. ft.

One 2 fl. oz. bottle of FolkArt Painted Finishes Concrete will cover approximately 1.5 square feet of surface.

When combining Light and Dark Concrete 2 fl. oz. bottles, approximately 3 square feet of project surface can be covered.

One 2 fl. oz. bottle of FolkArt Painted Finishes Moss will cover approximately 1.5 square feet of surface.

When combining Light and Dark Moss 2 fl. oz. bottles, approximately 3 square feet of project surface can be covered.

One 2 fl. oz. bottle of FolkArt Painted Finishes Rust will cover approximately 1.5 square feet of surface.

When combining Light and Dark Rust 2 fl. oz. bottles, approximately 3 square feet of project surface can be covered.

After properly loading the FolkArt Shortie Brush with Barnwood Tint, apply the tint directly to the unfinished wood surface by brushing long, smooth strokes. Do not allow the tint to pool or puddle in areas.

NOTE: Wipe surface with a paper towel or soft, lint-free cloth to remove any excess Barnwood Tint. After the first step of Barnwood Tint has been applied, allow to completely dry (approximately 4 hours) before applying the Barnwood Wax.

After allowing the first step of Barnwood Tint to thoroughly dry (approximately 4 hours), shake well then apply a small puddle of Barnwood Wax to the palette. Load the FolkArt Shortie Brush with Barnwood Wax and apply a smooth even coat across the surface.

NOTE: If applying this finish to a large surface or one that has many sides or angles, work a section at a time. While the Barnwood Wax is still wet, wipe to remove excess using a soft, lint-free cloth. Next, position the straight edged strip of scrap wood flush to the wet surface and pull the wood scraper across the surface in the direction of the wood grain. This will remove the top layer of wax leaving behind a small amount representing actual rustic barn wood. Allow to dry overnight.

Projects created using FolkArt Painted Finishes Barnwood can be wiped clean to remove dust using a slightly damp paper towel or soft cloth.

Projects created using FolkArt Painted Finishes Concrete can be wiped clean to remove dust using a slightly damp paper towel or soft cloth.

Projects created using FolkArt Painted Finishes Moss can be wiped clean to remove dust using a slightly damp paper towel or soft cloth.

Projects created using FolkArt Painted Finishes Rust can be wiped clean to remove dust using a slightly damp paper towel or soft cloth.

Because FolkArt Painted Finishes Barnwood is a two-step process with the first step being a tint, all unfinished wood surfaces should be clean and smooth. If necessary, sand smooth with medium to fine grit sandpaper. Then wipe with a tack cloth to remove sanding dust.

Surface preparation depends on the type of surface you've chosen.

No, FolkArt Painted Finishes Barnwood should only be used on indoor projects.

Yes, FolkArt Painted Finishes can be used on outdoor projects, assuming the surface itself can withstand outdoor elements.

For example, a papier mache surface that would not withstand outdoors elements naturally should not be used as an outdoor concrete project.

Yes, FolkArt Painted Finishes Moss can be used on outdoor projects, assuming the surface itself can withstand outdoor elements.

For example, a papier mache surface that would not withstand outdoors elements naturally should not be used as an outdoor rust project.

Yes, FolkArt Painted Finishes can be used on outdoor projects, assuming the surface itself can withstand outdoor elements.

For example, a papier mache surface that would not withstand outdoors elements naturally should not be used as an outdoor rust project.

FolkArt Painted Finishes Moss can be applied to a wide variety of rigid surfaces such as: wood, terra cotta, plastic, papier mache, metal cement, masonry and garden statuary.

Keep in mind, the painted moss finish will be most convincing when applied to a surface that moss might actually grow on.

FolkArt Painted Finishes Barnwood is self-sealing and does not require any added varnish or sealers for protection.

FolkArt Painted Finishes Concrete is self-sealing and does not require any added varnish or sealers for protection.

FolkArt Painted Finishes Moss is self-sealing and does not require any added varnish or sealers for protection.

FolkArt Painted Finishes Rust is self-sealing and does not require any added varnish or sealers for protection.

Dab to apply the thick paint for dimensional interest rather than brushing which may smooth the paint. Working small surface sections at a time and while Dark Moss is still wet, randomly dab on Light Moss for contrast and depth of color.

NOTE: If desired, either Light or Dark Moss can be used alone.

FolkArt Painted Finishes Barnwood is available as a two-step process that includes both Barnwood Tint and Barnwood Wax.

FolkArt Painted Finishes Barnwood is a water-based, non-toxic, easy-to-apply, two-step finish incorporating stain and wax that when applied to raw, unfinished wood will provide the illusion of aged, rustic barn wood.

FolkArt Painted Finishes Concrete is a water-based, non-toxic, easy-to-apply, textural paint that when applied to a variety of surfaces will create the illusion of concrete.

FolkArt Painted Finishes Moss is a water-based, non-toxic, easy-to-apply, textural paint that when applied to a variety of surfaces will create the illusion of moss that has grown on that surface.

FolkArt Painted Finishes Rust is a water-based, non-toxic, easy-to-apply, textural paint that when applied to a variety of surfaces will create the illusion of rust.

To create the look of moss growing onto a surface, it is best to use a stiff bristled brush that will allow you to manipulate the thick texture of FolkArt Painted Finishes Moss. FolkArt Shortie Brushes, are perfect for this textured paint application technique.

Depending on the chosen surface (if working on porous or nonporous surface), how thick the application, and how humid your work area is, FolkArt Painted Finishes Moss can dry to the touch within 4 hours. FolkArt Painted Finishes Moss will be cured to the surface in approximately 24 hours.

You should have your prepped project surface, both Light and Dark Moss, FolkArt Shortie Brushes, paper towels, craft knife, foam plates or a palette, and a container of water.

FolkArt Painted Finishes Barnwood can penetrate your clothing; however, it can be washed out immediately while wet using FolkArt Brush Plus and water.

FolkArt Painted Finishes Concrete can penetrate your clothing the same as when working with acrylic paints; however, it can be washed out immediately while wet using FolkArt Brush Plus and water.

FolkArt Painted Finishes Moss can penetrate your clothing the same as when working with acrylic paints; however, it can be washed out immediately while wet using FolkArt Brush Plus and water.

FolkArt Painted Finishes Rust can penetrate your clothing the same as when working with acrylic paints. However, it can be washed out immediately while wet using FolkArt Brush Plus and water.